Home Inspector Twin Cities

Infrared Inspections

We Use The Newest Technologies

Infrared Inspections Bradenton

About Thermal Infrared inspection

We now include Infrared Thermal Graphic inspections in addition to home inspections.  We also offer a full Infrared Thermal Inspection included in the report.   Our infrared thermal- graphic camera enables us to do a powerful non-invasive way to see what is happing to the residential home we are professionally inspecting. This technology helps monitor and diagnose the condition of  buildings.   It can quickly identify problem areas that can’t be seen by the naked eye eliminating destructive probing methods.  Our professional Inspections offers advantages to you over a typical Pear Land Home inspector who lack our Infrared thermal imaging Technology.  In fact less than ten percent of Home Inspectors even use Infrared Thermal Imaging Technology in the field.

Results are captured, documented instantly in a picture in a picture or just a full Infrared picture and easily into professional reports. 

The photo above shows a large amount of  heat lost due to lack of insulation behind the drywall within a living space. A regular home inspection would have never caught this!                                 

 Home Inspection will help you save hundreds , or even thousands of dollars a year.  We can identify missing insulation, improperly installed or compressed insulation, shrinkage or settling of various insulating materials.  We  can see moisture, leaks in roofs, leaks in water pipes leakage in buried hot water pipes, water lines and electrical issues (picture on left) before they pose a bigger risk to fiscal or physical well-being.

  What is Infrared Thermal Imaging Technology ?

Infrared thermal imaging has come a long way.  This technology was only domain of the science and space program and then made it’s way in the military and night vision programs.  Infrared thermal imaging has been in the industrial and commercial area for some time now.  It is now just coming into the residential field of professional home inspections. Thermography is the use of infrared imaging and measurement camera to “see”  and ” measure” thermal energy emitted from an object.  Because everything has a surface temperature, infrared thermal imaging ( ITI ) allows us to see the variances in those surface temperatures. The variances are represented by different colors and we can see the hot and cold spots given.  we now can take the picture and use our  diagnose methods to tell you whats going on in the building and wiring.  Infrared imaging  technology allows us to see what our eyes cannot see and  what other Houston home inspectors can not see.                 

  Why is Infrared Thermal Imaging so vital to your home inspection ?

There are two primary mechanisms for heat loss in Texas home buildings, these are conduction through the walls and air leakage. Both can be identified from the surface of the buildings with infrared thermography. Early correction of faults identified can be made before extensive damage can occur.

Conductive Losses :  Problems identified as conductive losses are: missing insulation, improperly installed or compressed insulation, shrinkage or settling of various insulating materials, excessive thermal bridging in joints between walls and the top and bottom plates, moisture damage to insulation, and moisture damage to building materials (picture above), heat loss through multi-pane windows with a broken seals, leak in water pipes, damaged heat ducts, or leakage in buried  heat and steam lines, water lines or underground sprinkler systems, etc.

Air Leakage : Air leakage is the passage of air through a building envelope, wall, window, joints, etc.  Leakage to the interior is referred to as infiltration and leakage to the exterior is referred to as ex-filtraion.   Excessive air movement significantly reduces the thermal integrity and the performance of the envelope.  Therefore this is a major contributor to the energy consumption in the building.

In addition to energy loss caused by excessive air leakage, it can cause condensation to from within and on walls.  This can create many problems; reduce insulation R-values, permanently damage insulation, and seriously degrade materials.  It can rot wood, corrode metals, stain brick or concrete surfaces. In extreme cases cause concrete to spall, bricks to separate, mortar to crumble and sections of a wall to fall jeopardizing the safety of the occupants.   It can also corrode structural steel, re-bar, and metal hangers and bolts with very serious safety and maintenance issues.

Virtually anywhere in the building envelope where there is a joint, junction or opening, there is potential for air leakage. An experienced themographer can identify the thermal irregularities on the building envelope and the thermal pattern discerning whether the pattern indicates a problem with the insulation, air leakage or the building structure.

 What Infrared Thermal Imaging is NOT.. 

It’s not a Moisture Meter, X-Ray Vision, Super Tool or a Risk Eliminator. It cannot always detect moisture because the best it can do is detect thermal differences. The infrared imaging camera can indentify the suspect areas that require further investigation.

The Professional Home Inspector, equipped with a thermal imaging camera and properly trained in it’s use,can find suspect areas with a house that a normal home inspector cannot. These areas include..

Water intrusion through the houses exterior covering, whether the house has brick, stucco, wood or vinyl siding.

Plumbing leaks inside the house, including leaking pipes,improperly seated toilets, leaky show pans, bathtubs and water pipe condensation that can grow mold.

Improperly installed insulation or no insulation at all.

Wet moisture inside walls in the in the stud area,

Circuit breakers in need of immediate replacement, Electrical faults before they can cause a fire, overloaded and undersized circuits. 

  FLIR i7 INFRARED CAMERA INFO

FLIR i7 are not only the most advanced infrared cameras in their class, but also the most compact, lightweight and easy to use.  The Brand new FLIR i7 was launched on September 1, 2009 and conforms to the new proposed RESNET guidelines which makes it ideal for all types of energy audits, weatherization jobs, and residential building inspections. 

Point and Click

It is fully automatic. All you have to do is just point and click to see the heat variations in the environment around you and find exactly what you are looking for. It works because everything gives off heat. The FLIR i7 thermal images create a visualization of heat differences for the naked eye. If you are a plumber, an electrician, install windows, insulation or HVAC systems, the FLIR i7 give you an edge in building diagnostics. 

Catch the Heat of the Moment

The infrared readings from the FLIR i7 are immediately and clearly visible on a full-color display. You save your readings as an image for later reference. FLIR infrared cameras are ideal for detecting hidden problems, assessing damages, surveying for moisture and leaks, identifying energy losses and poor insulation, and finding electrical faults and overheating.

SETUP A THERMAL INSPECTION
Call Us Today!

Infrared Certified fl